Timbre impermeable inalámbrico AUGIENB para hogar oficina, 1000 pies de largo alcance 300MMarca Generico
- Contemporary design
- 56 LED flash
- Outdoor use
- Waterproof: level IP44
- Material: ABS plastic
- Low noise
Detalle de producto
- 1 * Transmitter
- 1 * Receiver
- 2 * Screws&Anchors
- 1 * Double-sided adhesive tape
- 1 * User manual
AUGIENB?Wireless Waterproof Doorbell For Home/Office, 1000 Feet 300M Long Range, 52 Chimes, 4 Levels Volume, 56 LED FLASH?MEMORY
-Wireless Doorbell Working Distance
Wireless doorbell operated at 1000ft / 300m(e.g. villa having 5 floors). The signal can easily cross through metal doors or walls, but can not install transmitter on the metal, because built-in antenna can not close to metal.
-Sound Volume & Tune
Vol can be set to 25db(no noisy class)-110db(loudest). You can make it be heard just at 2 meter when set to min-vol,or be heard pass through 3 floor when set to max-vol. It has 52 Chimes and 4-level adjustable volume,include common ringtones or pleasant tunes.
-56 LED Flash
56 LEDs inside, the LEDS on the receiver will dance with the music when someone ring the doorbell, funny and decent gift for your friends or relatives
Remember your last melody and volume level after a power outage; no need to reset to your previous settings; convenient and easy-to-use design for an enhanced user experience
The Transmitter is waterproof(level IP44),withstands various harsh weather conditions, not afraid rainstorm, severe heat or cold, so perfect for outdoor use.
-Modern and Contemporary Design
The wireless and portable design allows you to install the doorbell in any section of your home, work, retail store, salon, or business.
Material: ABS plastic
Receiver voltage: AC 85-265V
Transmission Distance: 1000ft /300m
Waterproof rating: IP44
Working frequency: 433.92MHZ
Working temperature: -30°C ~ 70°C
Selectable ringtones: 52
Volume range：25-110dB,4 levels
Power: 1 x 23A 12V battery
Receiver size: 80*15*80mm
Transmitter size: 33*12*87mm
1?*?Double-sided adhesive tape
Use in Out-Of-The-Box Mode (Work on default ringtone)
Step1: Insert the receiver into the socket.
Step2: Find a suitable location, stick the transmitter or fix it with a screw (Tips: remove the battery protective film) , thus ok.
Use in DIY Mode (Not required, Optional)
If you want to change default ringtone, or do DIY(e.g. increase new device, make transmitter trigger different tune, etc):
Step 1: Set favorite tune for a receiver.
Step 2: Press and hold the Volume Button for 5 seconds until its light flash, then press the button on an individual transmitter within 5 second. Thus you have finish register this transmitter to this receiver.
For multi-transmitters: Repeat Step1-2 to register another transmitters to this receiver. Thus all of transmitters have been registered to this receiver and trigger different tune.
For multi-receivers: Please set receiver one by one, to register each transmitter to each receiver.
Note: Different color stands for different plug (black--EU plug and blue grey--US plug).
Enviado y Vendido por:
Producto con Envío Internacional
- Impuestos incluidos. No tendrás cobros extras.
- Cuenta con garantía de satisfacción.
- Devoluciones fáciles y gratis.
- Más Información