Purismo MAREA 12mm Brocas en ángulo Agujero Sierra Cortadora Carpintería s Perforadora de maderaMarca Generico
- Reasonable price
- Durable and practical
- Top Sales Item
- Type: End mills
- Material: Tungsten steel
- DIY Supplies:Woodworking
- Application: Bench trimming machine, carving machine
Detalle de producto
Product grade: Industrial grade
Material: Tungsten steel
Type: End mills
Application: Bench trimming machine, carving machine.
Size Diameter Total length Ф12 12mm 85mm Ф15 15mm 85mm Ф17 17mm 85mm
1. Specially prepared for bench trimming machine, portable engraving machine and so on.
2. No polishing, smooth cutting, no burrs, no burrs, no blackening.
3. Wide range of applications, such as factory building materials, home shops, carpentry enthusiasts.
4. The blade is made of high quality hard alloy and carefully designed,
developed and tested repeatedly, which not only improves the service
but also significantly improves the durability and noise reduction.
5. The hilt is made of hard 45 steel. The spiral design is wear-resistant and not ag.
6. New spray coating, wave resistance to high temperature, corrosion and other features, extended service life.
(1) The woodworking milling cutter is specially designed for the
portable and desktop woodworking engraving machine, and cannot be used
in the machine like electric drill, drilling machine and so on.
(2) Cutting s can produce smooth surface for wood such as hardwood,
softwood and synthetic board, but should avoid processing metal
materials such as copper and iron as well as non-wood materials such as
sand and stone.
(3) Make sure to use the clamping sleeve of appropriate size, because
it is worn seriously, not round enough and with taper of inner bore
cannot provide enough clamping strength, which leads to vibration or fly
off when the blade handle is broken.
(4) Never assume that the new jacket is safe and reliable.When uneven
contact marks or grooves are found in the handle part after clamping,
slip situation and inner hole deformation of the clamp should be
replaced immediately to avoid accidents.
(5) When the cutter is installed and clamped, stop the machine
immediately if it is found that the has a fluttering phenomenon
when working. Repeat the clamping for several times so that the
handle and the clamping sleeve are in full contact and the work is
(6) The handle should be in good contact with the clamping sleeve,
and the handle must be fully inserted into the clamping sleeve and
tightened firmly, so as to provide sufficient clamping force for the
.A small part should not only be inserted into the sleeve, otherwise
it may cause breakage of the shank and damage to the cutter.
(7) Appropriate research and ear protection devices should be used during operation.
1 X Hole saw cutter
Reseñas del producto
Este producto aún no tiene reseñas. ¡Sé el primero en compartirnos tu opinión!
Cuéntanos, ¿qué te pareció el producto?
Enviado y Vendido por:
Producto con Envío Internacional
Hemos extendido temporalmente algunas estimaciones de tiempos de entrega de productos internacionales debido a la situación actual